4.
5.
To Unlock Volume Control To One Mode
(Global Volume Lock):
NOTE: The audio mode's volume controls are active regardless of
Volume Lock settings. However, if you lock the volume controls to
the AUD mode, you will have control of the audio device's volume
in all other modes (i.e., AUX , DVD , TV , and CBL ).
1.
2.
3.
4.
To Unlock All Volume Control
(Global Volume Unlock):
NOTE: Performing these instructions will set independent volume
control for all programmed devices.
1.
2.
3.
Repeat steps 1 through 3 (of this section) for
each device you want volume to be unlocked.
Now, after you select a device that has volume
unlocked (e.g., CBL), pressing VOL+, VOL-, or
MUTE, will control the device's volume only in
its own mode.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice,
then release SETUP.
Enter 9 - 9 - 3. The last-selected device key
will blink twice.
Select a mode (e.g., TV) where you want to
globally lock the volume controls. The selected
device key will blink twice.
Now, when you press VOL+, VOL-, or MUTE,
the volume of the selected device (e.g., TV)
can be controlled regardless of mode.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice,
then release SETUP.
Enter 9 - 9 - 3. The last-selected device key
will blink twice.
Press VOL+ once. The last-selected device key
will blink four times.
21