Programming Channel Control Lock; To Activate Channel Control Lock; To De-Activate Channel Control Lock - Universal Electronics COGECO ATLAS Guide D'utilisation

PROGRAMMING CHANNEL CONTROL LOCK

By default,the Cogeco Atlas DVR 5-Device Universal
Remote Control's channel-control capabilities are unlocked.
NOTE: This feature does not affect the AUD mode.

To Activate Channel Control Lock:

1.
2.
3.
4.

To De-Activate Channel Control Lock:

1.
2.
3.
4.
On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice, then release SETUP.
Enter 9 -7- 3. The CBL key will blink twice.
Press CH+ once. The CBL key will blink twice.
Now, regardless of what mode you select
(except AUD), only the channel control
capability of your cable converter will be
accessible.
On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice, then release SETUP.
Enter 9 -7- 3. The CBL key will blink twice.
Press CH- once. The CBL key will blink
four times.
Now, the remote control will provide TV and
VCR channel-control capabilities while in the
TV or VCR mode.
15