To Clear The F1 Key - Universal Electronics COGECO ATLAS Guide D'utilisation

To Clear The F1 Key:

1.
2.
3.
4.
On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice, then release SETUP.
Enter 9 - 9 - 5. The CBL key will blink
twice. Then select the F1 key and press
it once.
Press and hold SETUP until the CBL key blinks
twice, then release SETUP.
The F1 key is now clear and ready for
reprogramming (see To Program The F1 Key
on the previous page).
17