Medtronic Guardian 4 Mode D'emploi page 25

WARNING: Do not use the device if there is any cracking, flaking, or damage to the housing.
Cracking, flaking, or damage to the housing are signs of deterioration. Deterioration of the
housing can affect the ability to properly clean the transmitter and result in serious injury. Call
a local Medtronic support representative and discard the device according to local
regulations for battery disposal (non-incineration), or contact a healthcare professional for
disposal information.
To clean the transmitter:
1. Wash hands thoroughly.
2. Attach the tester to the transmitter to create a waterproof seal.
3. If there is adhesive residue on the transmitter, see Removing adhesive residue, page 32.
4. Rinse the transmitter under room temperature tap water for at least one minute, and until visibly
clean. Make sure all hard-to-reach areas are rinsed completely.
5. Prepare a mild liquid soap solution using 5 mL (1 teaspoon) of mild liquid soap per 3.8 L (1 gallon)
of room temperature tap water.
25