Vaisala Indigo 500 Serie Guide Rapide page 22

Starting up transmitter using web
interface
The transmitter has a web interface for remote access. Take the following steps to start using
the transmitter via the web interface.
For information on configuring the home views and outputs and updating the transmitter
software via the web interface, see Indigo 520 User Guide (M212287EN), available at
www.vaisala.com.
Connecting to web interface
Computer with:
• RJ45 Ethernet connector
• Web browser, for example, Firefox, Chrome, or Safari. Using the most recent
version is recommended.
1. Connect your computer to the same network as the transmitter. If you are connecting the
transmitter directly to your computer, connect the Ethernet cable from the transmitter to
the computer.
For a direct connection between the transmitter and your computer to work,
also make sure that the devices are in the same subnet and that your
computer has a static IP address.
2. Power up the transmitter.
Powering up takes some minutes.
3. Select the configuration menu symbol at the upper right corner of the touchscreen.
20
Figure 7 Web interface, Measurements
(Home) view
M212290EN-B