Vaisala Indigo 500 Serie Guide Rapide page 19

For information on configuring the home views and outputs on the touchscreen, see Indigo
520 User Guide (M212287EN), available at www.vaisala.com.
Configuring network connection on touchscreen
Before you start, find out from your local network administrator whether your transmitter uses
dynamic or static network settings.
• Dynamic network settings are automatically assigned by a DHCP server each time the
transmitter is powered up.
• Static network settings must be configured manually. Ask your local network
administrator for the settings.
Figure 5 Network settings on touchscreen
1. Make sure that the Ethernet cable is connected to the transmitter.
The Ethernet connector's LED lights up.
2. Select the configuration menu symbol at the upper right corner of the touchscreen.
3. Select Transmitter > Network.
4. Make sure that Network off/on is set on.
5. Select the setting type:
• Select DHCP if the transmitter is in a network that assigns network settings
automatically.
• Select Static IP to configure network settings manually.
17