Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
8.
Step on the foot control again to continue winding the bobbin. Winding stops automatically
when the bobbin is full. You can also stop winding when you have wrapped enough yarn
for your project.
9.
Take your foot off the pedal to stop the machine.
10. Push the bobbin winder to the left, cut the thread and remove the threaded bobbin.
Inserting the bobbin
1.
Make sure the on/off switch is set to "OFF".
2.
Push the bobbin cover release button to the right to remove the cover.
3.
Hold the bobbin with the thread unwinding anticlockwise and place it in the bobbin case.
4.
Pull the end of the thread to make sure the bobbin turns anticlockwise. If the bobbin turns
clockwise, it has been incorrectly positioned. Remove the bobbin, turn it over and reinsert
it into the bobbin case. Pull on the end of the thread to check once more.
5.
Follow the below-indicated sections to thread the upper thread and pull the bobbin thread.
47
EN
Publicité
