Care And Cleaning - Toto CST243 Manuel D'installation

1) Shut off the water supply.
2) Flush the toilet to remove the water inside the
tank.
3) Remove the tank lid and place somewhere safe.
NOTE: Before removing anything from the tank,
note the placement of the drain valve, chain and
refill tube.
4) Unhook the refill tube from the overflow tube of
the drain valve.
5) Unhook the chain from the trip lever.
6) Uninstall the tank (refer to the toilet installation
manual).
7) Remove the drain valve body from the tank.
8) Replace the drain valve in the same position as
the former drain valve.
9) Hand tighten the mounting nut of the drain valve
and use a wrench to tighten another 3/4 turn.
10) Reinstall the tank onto the bowl and place the
chain and refill tube the same way as it was for
the former drain valve.
11) Turn the water supply back.
12) Check for any leakage after the tank has been
filled.
WARNING!
DO NOT USE IN-TANK BOWLCLEANERS.
The use of high concentration of chlorine or chlorine-related products can seriously
damage fittings in the tank. This damage can cause leakage and property damage.
TOTO shall not be responsible or liable for any tank fitting failure or damage caused
®
by the use of in-tank bowl cleaners.
MAINTENANCE INSTRUCTIONS
Replacing the Drain Valve

CARE AND CLEANING

ill. 1
Flush Tower
ill. 2
9
Refill Tube
Drain Valve