Toparc NUM MIG-1 Mode D'emploi page 6

INSTALLATION
WARNING
ELECTRIC SHOCKS CAN BE FATAL
Only experienced personnel authorised by the manufacturer may carry out the installation. During installation, make sure
that the generator is disconnected from the mains.
Video for the kit's installation:
NUM MIG-1
https://www.youtube.com/playlist?list=PL7Y7wApgIJaSwDJ9f
NUM MIG-1
https://www.youtube.com/playlist?list=PL7Y7wApgIJaTDVIgFrVxc1ZOBzCnXfehe
NUM MIG-1
https://www.youtube.com/playlist?list=PL7Y7wApgIJaSib3J2i96haTPlAZrmBiSF
Any access to internal areas beyond the areas described in this video guide is prohibited and voids the warranty and any other form of support.
Indeed, these manipulations may be damaging to the parts and/or the internal electronic components of the generator.
6
KIT NUM MIG-1
NUM MIG-1 + NUM-1
3_4KyWe84UZrinBp
NUM MIG-1 + NUM-1
NUM MIG-1 + NUM-1
NUM MIG-1 + NUM-1 + NUM-2
https://www.youtube.com/playlist?list=PL7Y7wApgIJaSwDJ9f3_4KyWe
84UZrinBp
The reels are delivered in «Master» configu-
ration (N°1).
For use in double wire feeders, one of the two
wire feeders must be configured as a «Slave»
wire feeder (N°2). To configure it, follow the
instructions in the video:
EN