Technical Specifications - Kärcher SC 1.020 Mode D'emploi

Troubleshooting
Often, failures have simple causes and you can
do the troubleshooting yourself using the follow-
ing overview. If you are in doubt or if the failure is
not listed here please contact the authorized
customer service.
Danger
Always disconnect the mains plug and allow the
steam cleaner to cool down before performing
any maintenance work.
Repair works may only be performed by the au-
thorized customer service.
Long heating-up time

Steam boiler is decalcified.
Descale the steam boiler.
No steam

No water in the steam boiler.

Turn off the appliance.
See „Refilling Water" Page 8.
Steam lever cannot be pressed anymore
Steam switch is secured with the lock / child-

proof lock.
Move the selector switch for the steam vol-
ume to the front.
High water output

Steam chamber too full.
Press the steam gun until less water is emit-
ted.

Steam boiler is decalcified.
Descale the steam boiler.
Spare parts
Use only original KÄRCHER spare parts. You
will find a list of spare parts at the end of these
operating instructions.
Warranty
The warranty terms published by the relevant
sales company are applicable in each country.
We will repair potential failures of your appliance
within the warranty period free of charge, provid-
ed that such failure is caused by faulty material
or defects in manufacturing. In the event of a
warranty claim please contact your dealer or the
nearest authorized Customer Service centre.
Please submit the proof of purchase.
(See address on the reverse)

Technical specifications

Power connection
Voltage
Protective class
Protection class
Performance data
Heating output
Operating pressure max.
Heating time
Max. steam quantity
Dimensions
Boiler capacity
Weight (without accessories)
Width
Length
Height
Subject to technical modifications!
EN
– 11
220-240 V
1~50/60 Hz
I
IPX4
1500 W
0,32 MPa
8 Minutes
40 g/min
1,0 l
3,1 kg
254 mm
380 mm
260 mm
17