Master Trimmers MT Professional 50 Manuel D'utilisation Et De Maintenance page 26

Place the collection bag, as shown in the following image, resting
7
the ring on the hooks of the barrel located in the lower part of the
machine body (A).
Remove the screws, washers and nuts indicated in the following
9
image using an Allen key Nº 3.
Assemble the outlet tube (E) at the end of the container. Insert the
11
groove of the tube into the knob to fix it.
26
Place the container (C) on the grid of the machine body. Secure it
8
with the two retaining knobs (F).
Place the dispenser body (D) in position and fix it to the container
10
lid (C) with the components from the previous step. Tighten the
bolts progressively in a staggered manner to distribute the forces
evenly.
Finally, connect one end of the power cable (M) supplied to the
12
socket provided on the body of the machine, and the other end to
the electricity supply.
IMPORTANT: Make sure that the electrical wiring is
perfectly positioned, without forming loops that could
cause tripping.
www.masterproducts.es