Master Trimmers MT Professional 50 Manuel D'utilisation Et De Maintenance page 25

Start-Up
Assembling the MT Professional 50 / 75
The MT Professional 50 and 75 machines are delivered fully
1
protected and boxed. Open the box and check the contents. Place
the parts on a flat surface with room to manoeuvre.
Place the body of the machine (A) as shown in the image, on a flat
3
surface with a height to facilitate assembly. Secure the feet with
four screws (H) using Allen key Nº 4. Proceed in the same way with
the remaining feet.
Identify the collection bag (I) and the ring (J) that is supplied closed
5
with the connector (K) already assembled. Separate one end of
the ring from one end of the connector and insert the free end
through the slit of the bag (I) until it makes a complete turn as
shown in the following image.
2
4
6
K
J
www.masterproducts.es
Fit the rubber stops (G) on the base of the feet (B).
Position the machine supported on its four feet. IMPORTANT:
The MT Professional 75 model must be handled by two
people due to its weight.
Rejoin the end of the ring with the connector and hide the
connector inside the slit of the bag.
25