Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Disclaimers
Modifications to Master Products machines are prohibited without the manufacturer's approval. Following
unauthorised modification, the manufacturer declines any responsibility and cancels the warranty rights for the
machines to which modifications have been made. The manufacturer will not be responsible for any failures and
accidents that may result.
During the warranty period, Master Products machines must only be disassembled and repaired by the
manufacturer's technical staff or official representatives.
The operator who uses the machine must ensure that the crushed material is removed regularly, since the residues
can cause an obstruction and, therefore, a malfunction of the machine.
Transport
MT Professional 50: Box 57 x 58 x 73 cm = 34 kg // Machine net weight = 30 kg
MT Professional 75: Box 85 x 81 x 75 cm = 72 kg // Machine net weight = 68 kg
IMPORTANT: The MT Professional 75 model must be carried by two people due to its weight.
Electrical connection
The MT Professional 50 and 75 machines must be connected to a single-phase 230 V/50-60 Hz electricity supply.
Placement
The MT Professional 50 and 75 machines must be placed on a flat surface without irregularities, ensuring their
stability and a good working position for the user. They are only suitable for indoor use and under no circumstances
should the electrical part be exposed to water and/or humidity.
24
www.masterproducts.es
Publicité
Table des Matières
