Connection; Connecting The Inputs - Renkforce DJM700U USB-CLUB-MIXER Mode D'emploi

8. Connection

The mains socket to which the device is connected must be easily accessible so that the fog
machine can be separated from the mains voltage quickly in case of an error.
Disconnect the mixer and all other devices to be connected to it from the mains supply (pull the
power plugs) before connecting the devices to each other.
Do not let the mains cable come into contact with other cables. Be careful when handling
mains cables and mains connections. Mains voltage may cause potentially fatal electric shock.
Only use properly shielded cables with suitable connectors to connect the inputs and outputs.
Using the wrong cables can cause interferences.
To avoid distortion or mismatches that could damage the mixer, only devices equipped with
suitable inputs and outputs of the same connection type may be connected to the inputs and
outputs of the mixer.
Ensure before plugging in the mains plug that the device voltage indicated on the rating plate
corresponds to the available mains voltage. Do not connect the device if the indication does
not correspond to the available mains voltage. Incorrect supply voltage may lead to irreparable
damage to the device and danger to the user.
Also observe the values stated in the "Specifications".
The following applies to all RCA connections:
• The white RCA socket on the mixer is the connection for the left channel.
• The red RCA socket on the mixer is the connection for the right channel.
a) Connecting the inputs
LINE/CD CH-1 to CH-5 (34)
The mixer is equipped with the LINE/CD RCA stereo inputs to connect LINE/CD audio devices such as a
tuner, a CD player or an MP3 player. These inputs are only suitable for the connection of line-level audio
devices.
These inputs are not suitable for record players.
33