Safety Instructions - Renkforce DJM700U USB-CLUB-MIXER Mode D'emploi

5. Safety instructions

The guarantee will be void if damage is incurred resulting from non-compliance with these
operating instructions. We do not assume liability for any resulting damage.
Caution! The product can be damaged if overloaded. In such in case the warranty/guarantee is
voided.
We do not assume liability for damage to property or personal injury caused by improper use or
failure to observe the safety instructions. In such cases the warranty/guarantee is voided.
Dear customer, the following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• To ensure that the device is set up correctly, always read these operating instructions inclu-
ding the safety instructions thoroughly and attentively before use.
• Check the device for damage before using it. If the device is damaged, do not operate it and
consult an expert or our service team.
• The unauthorized conversion and/or modification of the product is inadmissible for safety and
approval reasons (CE).
• The design of this product complies with safety class 1. Only a standard power socket (230 V~/
50/60Hz) of the public mains supply may be used as power supply.
• All persons operating, installing, setting up, commissioning or servicing this mixer must be
trained and qualified accordingly and observe these operating instructions.
• Never touch the mains plug with sweaty or wet hands. There is the risk of a fatal electric shock.
• If the mains cable is damaged, do not touch it. First, cut off the power supply to the relevant
mains socket (e.g. via the circuit breaker) and then pull the mains plug carefully out of the
mains socket. Never use the product if the mains cable is damaged.
• This product is not a toy, it is not suitable for children. Children cannot judge the dangers invol-
ved when handling electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device
or in its vicinity. Liquids could get into the device and impair the electrical safety. There is also
a great risk of fire or a fatal electric shock. If this is the case, first de-energize the respective
socket (e.g. switch off circuit breaker) and then pull the mains cable from the socket. Discon-
nect all cables from the device. Then, the product must not be operated any longer. Take it to a
specialist workshop.
• Do not expose the device to high temperatures, dripping or splashing water, strong vibrations
or heavy mechanical stress.
• Do not place open sources of fire, such as burning candles, on or directly next to the device.
• Do not operate the device unattended.
• Only use the device in moderate climate and avoid tropical environments.
• Do not leave packaging material lying around unattended. It may become a dangerous toy for
children.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insu-
rance Association for Electrical Systems and Operating Materials are to be observed.
• Do not listen to excessively loud music for a long period of time. This may damage your hearing.
26