Gurari GCH I 237 Manuel D'installation page 8

Usage
While tuning on the panel of the exhaust hood, press button 5. The panel will open the power, which
was set before it was turned on the last time. Using button 4, you can regulate the power of the
exhaust panel. At this, the panel often turns on the one power above, and, then from the beginning
((0-1-2-3-4-0-1-2...).) Power 0 means that the panel is turned off. Additionally, before the exhaust
panel turns off through the power regulations, it can be turned off at any time by pressing button 5.
Button 2: Turns on and off the lighting.
Timer / off timer
One-time pressing of button 5 during the operation mode of the exhaust hood, activates a 3-minute
timer at that power level.
Remote control
The remote control controls the corresponding functions. Buttons 4 and 5, as well as button 1 turn on
the hood. Button 1 turns off the hood during operation. Button 2 turns the light on or off. With button
6 one can activate the timer and set it as described above. Button 3 does not work on this unit (no
automatic mode).
1 - Receiver of remote control
2 - Light on / off
3 – Speed indicator
4 - Increase fan speed
5 - Motor on/off