Installation/Connection - Selve commeo 297774 Mode D'emploi

Installation/Connection

3. Installation/Connection
Safety instructions
• R isk of injury through an electric shock.
• T erminal connections must be carried out by an autho-
Warning!
rised electrician.
• I f more than one motor is being controlled via the com-
meo Receive Connect, the motors must be decoupled by
Warning!
relay controls. The switched current of the device must
be observed at all times.
1. C onnect the commeo Receive Connect as follows:
Mains 230 V/50 Hz
k
STAK3
1: N (blue)
2: L (black)
3: Not used (brown if available)
k: Earth conductor (green-yellow)
• T he neutral conductor (blue) is always on clamp 1.
• S pecific installation instructions for the connectors
STAK3 and STAS3 need to be observed, e.g.
Warning!
· Indication of the wiring type,
· Indication of the manufacture of tightness,
· S ecure both plug connectors by using the securing
clip.
• I nstall the commeo Receive Connect protected against
direct rain.
2. P rogramme a transmitter into the receiver (see section Initial­ope-
ration).
Note: Ensure that optimum radio reception is achieved.
Motor
STAS3
1: N (blue)
2:
▲
3:
▼
k: Earth conductor (green-yellow)
33
EN
k
EN