5. PROBLEMS
DEFECTS
Illumination lamp does not operate
The device does not run in any way
If the device performance is not enough
and it creates high noise while running
Technical data
Supply voltage
Insulation Class of Motor
Insulation Class
SOLUTIONS
Make sure that the plug is plugged in,
and that the fuses are intact. Check
the bulbs. Make sure you unplugged the
device before performing this check.
Tighten the bulbs if they are loose; you
can replace the bulbs if they still don't
work.
Check to see if the hood is plugged in or
if the plug is fit prop-erly into the socket.
Check the fuse, to which the appliance
is connected, as well as the main fuse of
your house.
Is the outlet diameter of the appliance's
flue adequate? (min.120mm). Are the
metal filters clean? Please check..
If you use the hood without flue, make
sure that the carbon filters have been
renewed.
Be attentive to ventilate your kitchen
adequately, in order to provide an airflow.
If you are still not satisfied with the
perform-ance of the appliance, consult
the authorized technical service.
220-240V 50Hz
Classe F
Classe I
32