Maintenance After Each Operation; Frequent Inspections - Garten Meister GM BFS 2T-52 Mode D'emploi


ATTENTION: Misuse and abuse may damage the brush cutter
blade and cause severe Injury from objects thrown off.

To minimise the danger of accidents from the brush cutter blade:
- Never cut bushes or trees with a diameter of more than 2 cm.
- Avoid the contact with metal objects, rocks, fences, walls, tree
stumps and other hard objects..
- Do not use the brush cutter blade vertically, e.g. for edging or
trimming hedges.

Regularly check the brush cutter blade for damage. A damaged
blade my not be used any longer and must be replaced.

If the blde becomes severely dull it must be sharpened by a
professional. If there is a noticeable wobble the blade must be
replaced.

Maintenance after each Operation

ATTENTION! Before cleaning, inspecting or maintaining the engine,
make sure that engine is stopped and has cooled down. The engine will
heat up during operation. Do not touch the exhaust system. There is
risk of burns!
Before working on the machine (transport, mounting, dismounting,
cleaning and servicing) and if not in use, remove the spark plug cap.

Frequent Inspections


Before starting work and after refuelling the tank, check if the trim
head is seated securely.

Even when used in the intended way, some components are
subject to normal wear. They have to be checked frequently. These
parts include, among others, the protective hood and the trim head.
These parts have to be replaced depending on the kind of duration
or usage.

Check the gear lubrication, especially during longer periods of work,
and severe dust exposure. So you will avoid excessive wear and
damage to the machine.
Maintenance
20