Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly
1. Attach
handle. To do soslight-
ly loosen the interior
hex screws (A) wih the
included hex key and
and insert both half
handles (B) and (C)
into the bracket (D) for
the handle.
2. Adjust the half handles
according
physical statue in such
a way that you kann
comfortably hold the
brush cutter. Tighten the interior hex screws.
The machine is is designed to be held on the right side of the
operator.
Notice: To sage space when transporting or storing the left handle
can be detached and the right handle with the regulating elements
can be turned back towards the engine.
3. After
that
cable to the tube with the included
cable ties to prevent it from getting
caught and damaged.
4. Stick both tubes into each other and
lock them together with the screw lock
and locking button (11).
5. Attach the protective hood (4) to its
mounting bracket.
6. Hand-tighten the interior hex screws
with the included hey key.
the
biker
to
your
attach
the
Assembly
B
D
regulating
10
D
A
C
Publicité
Table des Matières
