Mounting The Cutting Thread Container - Garten Meister GM BFS 2T-52 Mode D'emploi

Mounting the Cutting Thread Container

Before undertaking work on the machine detach the driveshaft
from the motor unit or remove the spark plug connector!
The tool shaft is equipped with left hand threads.
To use the machine as a grass trimmer mount the cutting thread
container.
1. Block the shaft of the tool socket With the toothed counterpiece and
the the included hex key through the suitable openings.
Attention: LEFT HAND THREADS!
2. Screw the cutting thread container onto the shaft and at the same
time hold the hex key in place.
Attention: LEFT HAND THREADS!
3. Remove the protector from the thread cutter on the protective hood.
Assembly
13