Starting The Engine - Warm Start; Hints On Safe Operation - Garten Meister GM BFS 2T-52 Mode D'emploi

Turning Off the Engine
1. Release the throttle (12). The engine is now at idle speed.
2. Place the Start/Stop switch (15) to the position "O" (Stop).
ATTENTION: The spindle will still rotate for some seconds after
turning off the engine.
Starting the Engine – Warm Start
For starting a warm engine, observe the chapter Starting the Engine –
Cold Start but please note that in this case the choke lever will remain
in the position "OFF".
Hints for safe Operation

Always wear person protection when working with the machine and
hold the machine securely with both hands on the Biker handle.

Always keep in mind that the trim head keeps rotating for a short
while after the throttle is released.

Always ensure a proper idle running of the engine so that the trim
head will no longer rotate, when the throttle is pressed.

Always use the highest speed for work, this way you will achieve
the best cutting result.

Always keep distance to cans, bottles, rocks, etc. Thrown objects
can cause serious injury to uninvolved persons and damage the
machine. If the machine touches a stone or a tree during work,
switch off the engine and remove the spark plug cap. Inspect the
trim head for damage. Never use a damaged trim head!

Avoid touching wood plants with the cutting thread. Any damage of
the bark can lead to the death of the plant.

Do not use the machine for other purposes then for trimming grass.
Never lift up the trim head above knee level during operation.
Operation
17