Garten Meister GM BFS 2T-52 Mode D'emploi page 43

blunt item. Never use your fingers to remove jammed foreign
objects, because this may cause serious injuries.
 Always keep in mind that especially during trimming of lawn
edges, gravel enclosures, and similar locations stone and dirt
can be hurled away from the cutting thread.
 Never cut against hard objects such as stone, etc. This way
you avoid injuries, and damages to the machine and the
cutting tool.
 Hold and guide the trim head as close to the ground as
possible.
 Only cut grass growing on the ground. Do not cut grass in
cracks or growing on rocks.
 Keep in mind that there is risk of injuries in the area of the
thread cutter on the protective hood.
 When the cutting tool is damaged, it must be replaced at
once.
 The machine and trim head must be properly inspected and
serviced periodically. Damages must be repaired by profes-
sionals. Only use accessories recommended by the manufac-
turer.
 Have your machine serviced only by qualified personnel and
by use of original spare parts only. This ensures that the
safety of the device is maintained.
 Even if you operate the device correctly, residual risks always
remain. The following hazards may occur in connection with
the design and construction of the device:
- Damage to health resulting from hand-arm vibrations if the
device is used for an extended period of time, not properly
guided oder maintained.
- Injuries and property damage caused by the trim head,
which is unexpectedly thrown out of the machine due to
sudden damage, wear or improper attachment.
Safety Notes
5