Unpacking Your Speakers - Dali Kore Manuel

3. Unpacking your speakers

We recommend unpacking your DALI KORE speakers
near where you intend to use them. DALI KORE
speakers are fi ‫ ﬙‬ed with transit wheels to make it
easier to move them around. The transit wheels
should remain fi ‫ ﬙‬ed until the speakers are in their fi nal
working positions. Section 4 describes how to position
your speakers.
Remove the screws at
1
the top and bo‫ ﬙‬om of
the shipping crate.
Remove the top and
2
sides of the shipping
crate. The rear panel
A of the crate will be A
used as a ramp.
6
Unpacking and installing your DALI KORE speakers
should be carried out by a minimum of two people.
If you need assistance with the installation,
please contact your local DALI dealer.
B
3
Position the ramp A
behind the speaker.
Remove the protective
cover .
B
A
Using the 6 mm Allen key,
4
unscrew and remove the
four M8 bolts securing the
speaker to the bo‫ ﬙‬om of
the crate.
6 mm
DALI KORE Manual
6 mm
A
Using the same 6 mm
5
Allen key, loosen the
four M8 bolts holding
the restraining
bars A so that the
speaker is lowered
onto the transit
wheels. Then remove
the four bolts entirely
and withdraw the two
restraining bars B .
B
Carefully roll the speaker
6
down the ramp. Once your
DALI KORE speaker is
unpacked from its shipping
crate, you can push it into its
listening position.
Avoid touching
the drivers.
DALI KORE Manual
Position the magnetic spike feet underneath each
7
spike then unscrew and remove the golden
A
thumbscrew B located above the spikes.
B
A
8
Use the 5 mm Allen key to lower the spikes A
until the transit wheels are raised from the fl oor
and the speaker is supported on the spikes B .
A
5 mm
B
7