Levelling The Refrigerator; Making Minor Adjustments To The Doors - Samsung RSH7ZNRS Mode D'emploi

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make fi nal adjustments. If the refrigerator
is not level, it will not be possible to get the doors
perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Screw Driver
When the Freezer door is higher than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the fridge.
Leg
Refer to the next section for the best way to
make very minor adjustments to the doors.
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for getting
the doors perfectly even. If you need help, review the
previous section on levelling the refrigerator.
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows :
1. Unscrew the
nut
lower hinge until
it reaches the
Leg
upper end of the
bolt
2. Adjust the
Screw Driver
3. After adjusting
When the door of the freezer
is higher than the fridge
from the
1
2
.
When you release the nut
you use the Allen wrench provided
2
the bolt in a counter-clockwise direction.
You should then be able to unscrew the nut
with your fi ngers.
height difference
between the
doors by turning
2
the bolt
clockwise
or counter clockwise
When you turn clockwise
move up.
the doors, turn
1
the nut
clockwise
until it reaches
the lower end
of the bolt, then tighten the bolt again with the
wrench 3 to fi x the nut in place
If you do not secure the nut fi rmly, the bolt may
release.
Adjustment part
3
Wrench
2
Bolt
1
Nut
, make sure that
1
3 to loosen
1
3
Wrench
2
Bolt
.
, the door will
3
Wrench
2
Bolt
1
Nut
.
1
_11
setting up