Levelling The Refrigerator - Samsung RB12J Série Mode D'emploi

Flooring

Levelling the refrigerator

< Case 1 >
DA68-03174Z-02.indb 23
For proper installation, you must place this
refrigerator on a level, hard surface that
is the same height as the rest of the floor.
This surface should be strong enough to
support a fully loaded refrigerator.
To protect the floor finish, cut a large
section of the cardboard carton and place
it under the refrigerator where you are
working.
If the front of the refrigerator is slightly
higher than the rear, the door can be
opened and closed more easily.
When installing the refrigerator, make
sure both legs contact the floor for secure
installation.
Case 1) The appliance tilts down to the left.
Turn the left adjusting leg in the direction
of the arrow until the appliance is level.
< Case 2 >
Case 2) The appliance tilts down to the
right. Turn the right adjusting leg in the
direction of the arrow until the appliance
is level.
• Pulling or pushing the refrigerator
may damage the floor.
Moving the refrigerator after
installation may damage the floor.
English 23
2016. 3. 31. 9:52