Samsung MC17J8100CS Mode D'emploi page 74

Problem
There is water
dripping.
There is steam
through a crack in
the door.
There is water left
in the oven.
The brightness
inside the oven
varies.
Cooking is
finished, but the
cooling fan is still
running.
Pressing the
START button
operates the oven.
Turntable
While turning, the
turntable comes
out of place or
stops turning.
The turn table
drags while
turning.
The turn table
rattles while
turning and is
noisy.
MC17J8100CS_AC_DE68-04224B-01_EN+CFR.indb 73
Cause
Water or steam may be generated
by the cooking or defrosting
process, depending on the food.
This is not an oven malfunction.
Water or steam may be generated
by the cooking or defrosting
process, depending on the food.
This is not an oven malfunction.
Water or steam may be generated
by the cooking or defrosting
process, depending on the food.
This is not an oven malfunction.
Brightness changes depending on
power output changes according
to function.
To ventilate the oven, the cooling
fan continues to run for about 3
minutes after cooking is complete.
This happens when the oven was
not operating.
There is no roller ring, or the roller
ring is not properly in place.
The roller ring is not properly
in place, there is too much food,
or the container is too large
and touches the inside of the
microwave.
Food residue is stuck to the
bottom of the oven.
Action
Let the oven cool and then wipe
with a dry dish towel.
Let the oven cool and then wipe
with a dry dish towel.
Let the oven cool and then wipe
with a dry dish towel.
Power output changes during
cooking are not malfunctions. This
is not an oven malfunction.
This is not an oven malfunction.
The microwave oven is designed
to start operating when you press
the START button if it was not
operating.
Install the roller ring and then try
again.
Adjust the amount of food. Do not
use containers that are too large.
Remove any food residue stuck to
the bottom of the oven.
English 73
11/28/2017 4:19:08 PM