Bt Mode - auna V-14 DAB Mode D'emploi

EN
52

BT MODE

Check that your Micro is in BT mode. If you are not already in BT mode,
short press the Mode button on the front of the Micro or on the remote
control until you are in BT mode (check the display). 'Not connected' will
flash in the display, whilst your product searches for BT devices.
Pairing your Stereo flat micro system
In BT Mode:
1. 'Not connected' will flash in the display, whilst your product searches
for BT devices.
2. On the device that you would like to connect to your Micro via BT (e.g.
iPhone/ iPad/Android/other phone/Tablet/Computer), turn on BT
connectivity and ensure that it is 'discoverable'.
Note: If necessary, refer to the instructions for your device to add or set
up BT.
3. Select to 'Add new device', if necessary.
Note: Some products will automatically search for a new device and so
the 'Add new device' option is not available.
4. When found, your Micro will be displayed as V_14 DAB. Select the
device name to begin pairing.
5. When pairing is complete 'connected' will stop flashing in the display,
and will be constantly displayed.
6. Now that you have paired your device with the Micro, it will connect to it
when it is within range, which is about 10 metres or less (33 feet or less),
line of sight.
7. Your device will remain paired with the Micro unless you decide to
disconnect or 'unpair' it.