auna V-14 DAB Mode D'emploi page 44

EN
44
Previous track
Short press the < button on the Micro or the << button on the remote
control.
Fast forward within a track
Long press the > button on the Micro or the >> button on the remote
control.
Fast backward within a track
Long press the < button on the Micro or the << button on the remote
control.
Stop
Short press the button on the Micro or on the remote control.
Programmed play mode
In programmed play mode, you can program the play order of the tracks on
your CD. You can program up to 20 tracks in total.
Note: To set up programmed play mode, the CD must be stopped in the
CD compartment and must not be paused or playing.
In CD mode, with the CD you wish to programme in the CD compartment
and stopped:
1. Short press the Prog. button on the Micro or on the remote control to
enter CD programmed play mode. '01' will flash in the display.
2. Use the < or > buttons on the Micro or the << or >> buttons on the
remote control to go to the track number that you would like to
program to play first. Short press the Prog. button on the Micro or on
the remote control to confirm.
3. '02' will flash in the display and you can select the second track that
you would like to programme. Continue to select each track as in Step 2
above, up to a total of 20 tracks.
4. Short press the Prog. button on the Micro or on the remote control
again to confirm the last track in the programmed play mode list.
5. Short press the button on the Micro or on the remote control to play
the programmed tracks.
6. To exit programmed play mode, short press the PLAY button twice on
the Micro or on the remote control.