Cd Mode - auna V-14 DAB Mode D'emploi

CD MODE

Note: Please make sure that you remove the cardboard shipping
protector from within the CD compartment before you try to use CD
player.
• Check that your Micro is in CD mode.
• If you are not already in CD mode, short press the Mode button on
the front of the Micro or on the remote control, until you are in CD
mode (check the display). The display will show 'CD' and '- -' will flash,
followed by 'No' if the CD compartment is empty.
Play a CD
Note: It is not possible to play DVD or computer CDs.
1. Short press the Eject button on the Micro or on the remote control. The
CD compartment cover will slide up and 'OPEN' will be displayed.
2. Place an audio CD, label side facing towards you, into the CD
compartment. Please ensure that you line up the hole in the centre of
the CD, with the central spindle and press back into place.
3. Short press the Eject button on the Micro or on the remote control. The
CD compartment cover will slide down and '- -' will flash on the display,
followed by the number of tracks on the CD, e.g. 12.
4. Short press the PLAY button on the Micro on the remote control to play
the CD.
CD controls
You can use the following controls on your Micro in CD mode.
Play
Short press the button on the Micro or on the remote control. The first track
will begin to play and the track number will be displayed.
Pause
Short press the button on the Micro or on the remote control. A small icon
will flash on the right hand side of the display to indicate that the CD has
been paused. Short press the button again to continue to play the track/CD.
Next track
Short press the > button on the Micro or the >> button on the remote
control.
EN
43