Specific Safety Rules And Symbols - Hitachi DB 3DL2 Instructions De Sécurité Et Mode D'emploi

c) When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects, that can
make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fi re.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualifi ed repair
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
WARNING
Some dust created by power sanding, sawing,
grinding, drilling,
activities contains chemicals known to the State
of California to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
Lead from lead-based paints,
⦁
Crystalline silica from bricks and cement
⦁
and other masonry products, and
Arsenic and chromium from chemically-
⦁
treated lumber.
Your risk from these
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
fi lter out microscopic particles.
SPECIFIC SAFETY RULES AND
SYMBOLS
1. Use auxiliary handle(s), if supplied with the
tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
person using
and other construction
exposures varies,
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
3. Hold power tools by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring or its own cord.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4. Always wear ear protectors when using the
only
5. Never place hands or other body parts near the
drill bit or chuck during operation. Hold the drill
by its handle only.
6. Because the cordless driver drill operates by
battery power, be aware of the fact that it can
begin to operate at any time.
7. When working at elevated locations, clear
the area of all other people and be aware of
conditions below you.
8. Never touch moving parts.
Never place your hands, fi ngers or other body
parts near the tool's moving parts.
9. Never operate without all guards in place.
Never operate this tool without all guards or
safety features in place and in proper working
order. If maintenance or servicing requires the
removal of a guard or safety feature, be sure
to replace the guard or safety feature before
resuming operation of the tool.
10. Use right tool.
Don't force small tool or attachment to do the
job of a heavy-duty tool.
Don't use tool for purpose not intended —for
example— don't use circular saw for cutting
tree limbs or logs.
11. Never use a power tool for applications
other than those specifi ed.
Never use a power tool for applications other
than those specifi ed in the instruction manual.
12. Handle tool correctly.
Operate the tool according to the instructions
provided herein. Do not drop or throw the tool.
Never allow the tool to be operated by children,
individuals unfamiliar with its operation or
unauthorized personnel.
English
tool for extended periods.
Prolonged exposure to high
intensity noise can
hearing loss.
cause
5