Mixing Device For Servo Motor - Tuxhorn tubra-PGM-S DN 20 Instructions De Montage Et D'utilisation

4.4

Mixing device for servo motor

Mount servomotor on valve
A
Art.-Nr. 968.20.27.00
Last updated 2022/02/28
Only authorised, specialist personnel are
permitted to open electrical housings
and work on the electrical system after
de-energising the equipment.
To remove the servomotor, the clip must be
pulled out of the servomotor.
Then the servomotor can be disconnected
from the valve.
Danger
When assembling the servomotor, the con-
trol handle of the drive must be in the max-
imum position and the notch of the
Driver [A] must stand at 9 o'clock.
Before mounting, the clip must be posi-
tioned in the actuator.
Then place the servomotor on the valve and
press down.
- 9 -
GB