Starting Up The System For The First Time; Operation; Control Unit; Gravity Brake - Tuxhorn tubra-FRISTA-XL Instructions De Montage Et D'utilisation

5.2

Starting up the system for the first time

Observe the corresponding operating manual when starting up the control unit.
Preparation and in-
spection
Switch on the control
unit
Set up the control
unit
Test the outputs
Set up the control
unit
6 O p e r a t i o n
6.1

Control unit

Please refer to the separate manual for operation of the control unit.
6.2

Gravity brake

A gravity brake is integrated in the return flow circuit to prevent incorrect circulation in the
primary circuit.
906.50.02.00
Last updated 2022/03/16

Visual inspection of the installation

Are all of the sensors installed and connected at the correct
locations?

Are all outputs connected?

Close the housings of all controllers
Supply power to the control unit
Set the current time and date
Check all switch outputs and check they operate correctly
Set the switching times and switching temperatures
gravity
brake
- 14 -
GB