Factory Default Settings; Technical Support - Emerson Numatics G2-2 Serie Guide De Démarrage Rapide

11) G2-2 AS-i Features
Features
AS-i Spec. Supported
Bus Topology

12) Factory Default Settings

All standard AS-i manifolds ship with specific factory default settings. Below is a list of the factory default
settings:
Description
Node Address
First Address Board
Power Jumper
Second Address Board
Power Jumper
(if present within the module)

13) Technical Support

For technical support, contact your local Numatics distributor. If further information is required,
please call Numatics Inc. at (248) 887-4111 and ask for Technical Support.
Issues relating to network set-up, PLC programming, sequencing, software related functions, etc...
should be handled with the appropriate product vendor.
Information on device files, technical manuals, local distributors, and other Numatics, Inc. products
and support issues can be found on the Numatics, Inc's. WEB site at
G2-2 Series AS-i Quick Start Manual
Designed to AS-i Specification Revision 2.1
Daisy chained, star, branch lines, or tree structure using flat two wire
cabling
Standard
Addressing 12 Outputs = AS-i Address 0 (single node module),
Modules
Extended
Addressing 9 Outputs = AS-i Address 0A (single node module),
Modules
3835051 TDG22ASQS1-4
Subject to change without notice
www.numatics.com/fieldbus
Description
Default Settings
4 Output Module = AS-i Address 0
8 Outputs = AS-i Address 30 & 31
30 & 31 (dual node module)
16 Outputs = AS-i Address 30, 31, 30 & 31
3 Outputs = AS-i Address 0A
6 Outputs = AS-i Address 30A & 31A
30A & 31A (dual node module)
12 Outputs = AS-i Address 30A, 31A, 30A & 31A
External Power
External Power
www.numatics.com
9/06
Page 11