Elem Garden Technic TDE24V32-LI Traduction D'origine page 58

Inserting the Battery E
Lift up battery cover 7.
Fit battery 8, when correctly fitted a "click"will be heard.
If the mower is not going to be used immediately fit isolator key as shown in the storage position.
Removing the Battery
Lift up battery cover 7.
Remove isolator key 10.
Remove the battery 8.
Meaning of the Indication Elements
Charging Procedure F
The charging procedure starts as soon as the mains plug of the battery charger is plugged into the socket outlet
and the battery 8 is inserted into the charging compartment 17.
Due to the intelligent charging method, the charging condition of the battery is automatically detected and the
battery is charged with the optimum charging current, depending on battery temperature and voltage.
This gives longer life to the battery and always leaves it fully charged when kept in the charger for storage.
Control of the charging procedure is indicated via the charge control LED 18.
LED status display ： ： ： ：
Charger AC power access, the battery is not installed (no load condition): bright red LED 18.
Rapid-charging Procedure
Access to the normal battery charging, the green LED 18 flashes.
Note: The rapid-charging procedure is only possible when the battery temperature is within
the allowable charging temperature range.
Battery Charged
Fully charged, the green LED 18 lit. This rechargeable battery can be used directly.
No charging procedure possible
Abnormal situation, the red LED flashes.
The charging procedure can not be started and the battery cannot be charged (see "Trouble-shooting").
58