Functional Description - Elem Garden Technic TDE24V32-LI Traduction D'origine

Protect the battery against moisture and
water.
Store the battery only within a temperature
range between 0 ° C and 50 ° C. As an example,
do not leave the battery in the car in summer.
Occasionally clean the venting slots of the
battery using a soft, clean and dry brush.
IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CARTRIDGE
Battery
Only use the original charger supplied
The mains voltage must be the same as the
charger operating voltage.
Using a charger whose electrical
characteristics are different from those of the
recommended charger could damage the
battery.
Avoid all fast charging or overcharging that
could shorten the battery life.
1. Before using battery cartridge, read all
instructions and cautionary markings on
battery charger, battery, and product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has
excessively shorter, stop operating
immediately. It may result in a risk of
overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical attention
right away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
become
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery
cartridge in locations where the temperature
may reach or exceed 50° C (122° F).
7. Do not incinerate the battery cartridge even
if it is severely damaged or is completely worn
out.
The battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before
completely discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2. Never recharge a fully charged battery
cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room
temperature at 10° C – 40° C (50° F – 104° F).
Let a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge once in
every six months if you do not use it for a long
period of time.

FUNCTIONAL DESCRIPTION

Installing or removing battery cartridge
CAUTION:
• Always switch off the tool before installing or
removing the battery cartridge.
• Make sure that you lock the battery cover
before use.
Otherwise, mud, dirt, or water may cause
damage to the product or the battery cartridge.
48