Assembly
For Your Safety
● Warning! Switch off, remove the isolator key and the battery before adjusting, cleaning or if cable is cut,
damaged or entangled.
● The blades continue to rotate for a few seconds after the machine is switched off.
● Caution –do not touch the rotating blade.
Handle assembly A
1, dealing with the bottom of the handle and the top of the handle of the screw holes align ;
2 , screws penetrate from outside to inside;
3, fixed nut tightened.
Note: Ensure that the cable clips supplied are used to fix the cable to the handle.
Snap together the grass box B
Add the grass box top with the grass collector-base by engaging the tabs along the edge together. Start your rear
and work your way forward.
56