Intended Use - Hilti TE 3000-AVR Mode D'emploi Original

damaged while working. Disconnect the supply cord plug from the power
outlet. Damaged supply cords or extension cords present a risk of electric
shock.
▶ Dirty or dusty power tools that have been used frequently for work on
conductive materials should be checked at regular intervals at a Hilti
Service Center.
dampness adhering to the surface of the tool may, under unfavorable
conditions, lead to electric shock.
▶ Switch the power tool off and unplug the supply cord in the event of
a power failure or interruption in the electric supply. This will prevent
accidental restarting when the electric power returns.
3 Description
3.1 Overview of the product
On/off switch
@
Service indicator
;
Grip
=
Air vents
%
Guide tube
&
3.2 Transport trolley components
Grip
@
Locking bar
;
Holder for accessory tools
=
(chisels)

3.3 Intended use

The product described is a hand-held electric breaker with 28 mm hex
chuck. It is designed for chiseling work on concrete, masonry and asphalt.
Excavation and compacting are further possible applications.
▶ Operation is permissible only when connected to a power source providing
a voltage and frequency in compliance with the information given on the
type identification plate.
3.4 Possible misuse
This product is not suitable for working on hazardous materials.
This product is not suitable for working in a damp environment.
3.5 Service indicator
The breaker is equipped with a service indicator LED.
6 English
Printed: 16.02.2017 | Doc-Nr: PUB / 5070870 / 000 / 05
Dust (especially dust from conductive materials) or
1
2
Accessory tool retainer / lock-
(
ing bar
Chuck
)
Supply cord with keyed, re-
+
leasable plug connector
Connector on electric tool
§
Wheels
%
Wheel securing parts (washer,
&
retaining pin)
Power tool locating pin
(