Symbols On The Product; Product Information; General Power Tool Safety Warnings - Hilti TE 3000-AVR Mode D'emploi Original

Masquer les pouces Voir aussi pour TE 3000-AVR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.3 Symbols on the product

1.3.1 Symbols on the product
The following symbols are used on the product:
Chiseling
Chisel positioning
Protection class II (double-insulated)
Transport by crane is not permissible
Rated speed under no load

1.4 Product information

Hilti products are designed for professional use and may be operated, ser-
viced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
product and its ancillary equipment may present hazards when used incor-
rectly by untrained personnel or when used not as directed.
The type designation and serial number are printed on the type identification
plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to enquire about the product.
Product information
Breaker
Generation
Serial no.
2 Safety

2.1 General power tool safety warnings

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
▶ Keep work area clean and well lit.
accidents.
▶ Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
2
English
Printed: 16.02.2017 | Doc-Nr: PUB / 5070870 / 000 / 05
TE 3000­AVR
01
Cluttered or dark areas invite

Publicité

Table des Matières
loading

Table des Matières