Intended Use; Items Supplied; Technical Data - Hilti TE 500 Mode D'emploi Original

3.2

Intended use

The product described is an electrically powered breaker. It is designed for medium-duty chiseling work on
masonry and concrete.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which greatly reduces vibration.
3.4 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights.
The service indicator blinks.
Bring the product to Hilti Service in good time. This will help to ensure that it's always ready for use.
3.5

Items supplied

Breaker, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4

Technical data

4.1 Breaker
For details of the rated voltage, frequency, current and input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight
Protection class
4.2 Using extension cords
WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
• Use only extension cords of a type approved for the application and with conductors of adequate gauge
(cross section). The power tool may otherwise suffer a drop in performance and the extension cord may
overheat.
• Check the extension cord for damage at regular intervals.
• Replace damaged extension cords.
• When working outdoors, use only extension cords that are approved and correspondingly marked for
this application.
378617
*378617*
Printed: 18.04.2018 | Doc-Nr: PUB / 5071000 / 000 / 05
Meaning
• End of service interval – servicing is due.
• The product is faulty. Have the product repaired
by a trained electrical specialist.
TE 500
5.6 kg
(12.3 lb)
II
TE 500-AVR
5.7 kg
(12.6 lb)
II
English 5