Product Features; Technical Data - Bosch GCB Professional Serie Notice Originale

OBJ_BUCH-2520-002.book Page 13 Monday, June 20, 2016 8:45 AM

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
Band Saw
1 Auxiliary handle (insulated gripping surface)
2 Toggle switch
3 Speed regulator
4 Lock-on button for On/Off switch
5 On/Off switch
6 Handle (insulated gripping surface)
7 Cable tie
8 Hex key
9 Direction-of-rotation arrow on housing
10 Guide plate (for cutting close to walls)
11 Workpiece stop
12 Band-saw blade *
13 "PowerLight"
14 On/Off switch for "PowerLight"
15 Lever for band-saw blade pre-tension
16 Cover for band-saw blade
17 Locking flap
18 Saw blade guide (freehand cutting)
19 Saw blade guide (cutting close to walls)
20 Roller for band-saw blade
21 Hex socket screw for workpiece stop
Saw table
22 Material stop
23 Guide bar of material stop
24 Clamping screw of the material stop
25 Mounting holes
26 Quick-release button
27 Spindle handle
28 Clamping spindle
29 Scale for miter angles
30 Angle stop
31 Hex key
32 Locking screw for angle stop
33 Adjusting plate for spring damping
34 Adjusting screw
35 Transport wheels
36 Transport safety-lock
37 Tool arm
38 Fastening screw
39 Knob
The GCB 120 band saw and the GCB 120 Base saw table are avail-
able at retail outlets as a set (GCB 120 B) or as individual products.
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools

Technical Data

Band Saw
Article number
Rated power input
No-load speed
Saw blade dimensions
Weight according to
EPTA-Procedure 01:2014
Protection class
Permissible workpiece dimensions (maximum/minimum) see page 16.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Saw table
Article number
Max. cutting height
Weight according to
EPTA-Procedure 01:2014
Permissible workpiece dimensions (maximum/minimum) see page 16.
Assembly
 Avoid unintentional starting of the machine. During as-
sembly and for all work on the machine, the power plug
must not be connected to the mains supply.
Inserting/Replacing the Band-saw Blade
 Always wear protective gloves when mounting the
band-saw blade. Danger of injury when touching the
band-saw blade.
 Always wear safety goggles. Safety goggles will reduce
the risk of injuries.
Selecting a Band-saw Blade
An overview of recommended band-saw blades can be found
at the end of these instructions.
Inserting/Replacing the Band-saw Blade
(see Fig. A1 – A4)
– Swing the lever 15 by 180° to release the pre-
tension on the band-saw blade 12.
– Pull the locking flaps 17 outward and fold up the cover 16.
– Freehand cutting/Stationary operation: Guide the
band-saw blade 12 step by step between the saw blade
guides 18. The back of the saw blade must touch the bear-
ings in the lower part of the saw blade guides 18.
Cutting close to walls: Place the band-saw blade 12 step
by step in front of the saw blade guides 19. The back of the
saw blade must touch the bearings in the lower part of the
saw blade guides 19.
– Guide the band-saw blade 12 step by step around the two
rollers 20.
– Swing the lever 15 by 180° to tension the
band-saw blade 12.
English | 13
GCB 120
3 601 M36 0..
W 850
-1
min 61–230
mm 1140 x 12.7 x 0.5
kg 6.4
/II
GCB 120 Base
1 600 A00 1XS
mm 115
kg 21.7
1 609 92A 39V | (20.6.16)