Functional Description; Intended Use; Product Features - Bosch GST Professional 135 CE Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-660-001.book Page 8 Wednesday, March 12, 2008 11:13 AM
8 | English
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come
to a complete stop before placing it down.
The tool insert can jam and lead to loss of
control over the power tool.
Do not use the power tool with a damaged
cord. Do not touch the damaged cord and
pull the plug from the outlet when the cord
is damaged while working. Damaged cords
increase the risk of an electric shock.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.

Intended Use

The power tool is intended for making separat-
ing cuts and cut-outs in wood, plastic, metal,
ceramic plates and rubber while resting firmly
on the workpiece. It is suitable for straight and
curved cuts with miter angles to 45°. The saw
blade recommendations are to be observed.
1 609 929 N52 | (12.3.08)

Product Features

The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Plastic cap
2 Lock-on button for On/Off switch
(GST 135 BCE)
3 On/Off switch
4 Handle
5 Dial control for stroke rate preselection
6 Extraction adapter*
7 Vacuum connection*
8 Sliding shoe*
9 Base plate
10 Switch for sawdust blowing device
11 Adjusting lever for orbital action
12 Precision Control button
13 Precision Control guide cheeks
14 Guide roller
15 Saw blade*
16 Contact protector
17 Stroke rod
18 Dust cover for vacuuming*
19 SDS clamping lever for saw blade release
20 Vacuum hose*
21 Splinter guard*
22 Scale for miter angle
23 Dial control for pre-tension of base plate
24 Base plate clamping lever
25 Lead for the parallel guide
26 Locking screw for parallel guide*
27 Parallel guide with circle cutter*
28 Centering tip of the parallel guide*
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools