SERVICE
NO
USER
ABLE PARTS INSIDE.
Preventive maintenance performed by un-
au thorized personnel may result in mis-
placing of internal wires and components
which could cause serious hazard. We rec-
ommend that all tool service be performed by
a Bosch or Rotozip Factory Service Center or
1-877-ROTOZIP (1- 877-768-6947) if your tool
needs service.
Do not operate DM10 Dust Collection Attachment with the following
accessories, XB-MC1, XC-T1375, XC-T1000, XC-T750, XB-FTH1. Using
accessories not compatible with this attachment may cause personal injury or property damage.
Your attachment is compatible with the following accessories:
Zip® Bits
Sabrecut™ Multipurpose Zip® Bit (SC)
Standard Point Drywall Zip® Bit (ZB)
Guidepoint™ Drywall Zip® Bit (GP)
Window and Door Zip® Bit (WD)
Wall Tile Zip® Bit (TC)
XBITS®
Drywall XBITS® (XB-DW, XB-OWD)
Multipurpose XBITS® (XB-MP)
Multipurpose Dust Management XBITS®
(XB-MPDM)
DV-2610035986, Page: MUL (VAA), downloaded at: 2015.01.26_21:31:48, by PT-AC/MKP1-NA_Elise.Stockl
Maintenance
CLEANING
SERVICE-
and/or charger from the power supply be-
fore cleaning. The tool may be cleaned most
effectively with com pressed dry air. Always
wear safety goggles when cleaning tools
with compressed air.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed ob-
jects through opening.
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning sol-
vents, ammonia and household detergents
that contain ammonia.
Accessories
Floor Tile XBITS® (XB-FT)
Floor Tile and Countertop XBITS® (XB-
FTC)
Wall Tile XBITS® (XB-TC)
Grout Removal XBITS® (XB-GR)
Duracut™ Plaster XBITS® (XB-DC)
9
To avoid accidents, al-
ways disconnect the tool
Certain cleaning agents
and
solvents
damage