Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY RZ CONNECT TOOLS
1. With tool unplugged, remove RZ Connect
Depth Guide, Collet Nut, and Collet accord-
ing to your tool's instructions
2. Install RZ Connect coupler as shown and
lock clamp lever
3. Install Collet according to diameter of bit to
be used
4. Install Collet Fan by pressing collet lock but-
ton and rotating Collet Fan clockwise with
wrench provided. Do not fully tighten.
5. Install Fan Housing as shown. Dust Canis-
ter should be on right side of tool.
6. Secure Fan housing by installing RZ Con-
nect Thumbscrew(Black). Tighten firmly by
rotating clockwise. Do not use a Thumb-
screw from another tool.
Fig. 6
RZ CONNECT
TOOL
RZ CONNECT
COUPLER
RZ CONNECT
THUMBSCREW
DV-2610035986, Page: MUL (VAA), downloaded at: 2015.01.26_21:31:48, by PT-AC/MKP1-NA_Elise.Stockl
7. To remove, loosen thumbscrew by rotating
counter clockwise and remove parts in re-
verse order.
Do not operate DM10
Dust Collection Attach-
ment without Fan Housing mounted. Oper-
ating DM10 without Fan Housing mounted
may result in personal injury.
Always loosen and tight-
en the collet fan with off-
set wrench provided with attachment. Us-
ing collet fan as a gripping surface will damage
the collet fan and lead to personal injury or
property damage.
COLLET
COLLET
FAN
FAN
HOUSING
6
COLLET
WRENCH
Publicité
Table des Matières
