Before First Use; Using The Appliance - MPM MKW-08M Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
from the mains to do this safely! If you spill water on the espresso machine, leave it until
completely dry before use.
CAUTION! Do not fill the water tank above the 1.2 l. Do not power on the espresso machine with the water tank
empty or removed. Use only cold drinking water. Do not use hot water.

BEFORE FIRST USE

1. Remove the espresso machine from the packaging. Remove all plastic bags, fillers, safety
locks and packaging labels.
2. Inspect the espresso machine for damage which may have been caused in transport. If you
suspect that the espresso machine is damaged, do not use it. Consult the seller.
3. Verify that your power mains match the nameplate ratings of the espresso machine.
4. To ensure the best flavour of the coffee, carry out the steaming procedure. Follow these steps:
 Remove the water tank (18) from the espresso machine, pour about 1 litre of cold drinking
water. Place the water tank back in the espresso machine.
 Place the filter (6) in the filter holder (7) and attach the filter holder to its receptacle, and
secure. The filter must be empty. Do not add any coffee yet.
 Place the drip tray (11) in the drip tray seat (12) and place the drip tray grate (13) on the tray.
Place an empty cup on the grate. Make sure that the steam level knob (4) is set at its the
position "0".
CAUTION! The espresso machine does not come with any coffee cups. Use your own cups.
 plug the espresso machine to a power source and switch it on by pressing the power
switch (2a) – the appliance is now warming up, which is signalled by the slow flashing of
the indicators on the (2b) and (2c) buttons. Once the appliance has warmed up, the indi-
cators will illuminate solid. Press the 1-cup button (2b) – hot water will begin to flow into
the cup. When the water stops pouring, empty the cup and repeat the process twice more.
 use the steam heating button (2d) to heat up steam and once heated up (the indicator on
the button has illuminated solid), release some steam to a dish placed under the nozzle.
CAUTION! When the water pump is turned on for the first time with the pressure switch, unusual sound may
be heard which will stop in approximately 30 seconds. This is the water pump being vented and it is perfectly
normal.
CAUTION! The released steam jet is hot. Handle with care. Risk of burns!

USING THE APPLIANCE

ESPRESSO MACHINE WARMING
In order to achieve the best coffee aroma, warm the portafilter with the filtering basket and
the cup by following these steps:
1. Remove the water tank and fill it with cold drinking water. Replace the tank in the appliance.
2. Choose a filter basket (6), place it in the portafilter (7) and position the portafilter in the group
head (10). Do not put coffee in the chosen filter basket.
15

Publicité

Table des Matières
loading

Table des Matières