Technical Specification - MPM MKW-08M Manuel De L'utilisateur

TROUBLESHOOTING
PROBLEM
Water leaks from underneath the
espresso machine
Espresso machine fails to work
Steam does not froth milk
The coffee tastes sour
Machine does not draw water
despite full tank.
Brewing does not start

TECHNICAL SPECIFICATION

See the product's nameplate for technical specifications.
Length of the power cord: 0.8 m
NOTE! MPM agd S.A. reserves its right to modify the technical data!
PROPER DISPOSAL OF THE PRODUCT
Poland This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose the
waste electrical and electronic equipment in a safe way, contact your retailer or local Department of Environmental
Protection. Do not dispose the device with other municipal waste.
20
CAUSE
Drip tray overflow
Espresso machine does not
work properly
No power
Steam temperature too low
The milk container is too big
Skimmed and warm milk
is used
The espresso machine was not
rinsed of all citric acid
The coffee was poorly kept
Air in the system
Appliance memory error
(waste electrical and electronic equipment)
SOLUTION
Empty the drip tray
Contact an authorised service centre
Turn on the espresso machine, check the connection to
the mains, and contact an authorised service centre, if
necessary
Wait until the espresso machine is ready to vent hot steam
Use a tall mug with a narrow mouth
Use fat or semi-skimmed cold milk
Pass hot water several times through an empty filter
attached to the receptacle
Use fresh ground coffee Keep coffee in an air-tight
container
Blood the system through the steam nozzle using the
knob (4)
Switch the machine off and back on