Control Board - CAME BXV04AGS Instructions De Montage

Control board

The functions on the input and output contacts, the time settings and user management are set and viewed on the display.
All connections are protected by quick fuses.
For the system to work properly, before fitting any plug-in card, DISCONNECT THE MAIN POWER SUPPLY and remove any batteries.
Before working on the control panel, disconnect the mains power supply and remove the batteries, if any.
1
Terminal board for connecting control devices
2
Terminal board for connecting the safety devices
3
Terminal board for connecting the signalling devices
4
Terminal board for B1-B2 output
5
Connector for the RIOCN8WS module
6
Terminal board for BUS accessories
7
Connector for the CLOCK card
8
Memory Roll card connector
9
Terminal board for connecting the limit switches
10
Accessories fuse
11
Control board fuse
12
Terminal board for power supply to the control board
13
Line fuse
Remove the card cover before inserting the cards into the connectors.
14
Power supply terminal block
15
Terminal board for connecting the gearmotor
16
Terminal board for connecting the encoder
17
Display
18
Programming buttons
19
Connector for CAME KEY
20
RSE_1 connector for RSE card
21
RSE_2 connector for RSE card
22
Terminal block associated with the RSE_1 connector for paired or CRP
connection
23
Terminal board associated with the RSE_2 connector for CRP connection, IO
485 card or Modbus RTU interface
24
Connector for plug-in radio frequency card (AF)
25
Terminal board for connecting the antenna