Assembly - Craftsman 919.722020 Mode D'emploi

Contents of Carton
1 - Air Compressor
1 - Air Hose
1 - Inflator Accessory Kit
Tools Required for Assembly
1 - 9/16" open end wrench or
adjustable wrench
1 - adjustable wrench
Unpacking
1. Remove unit from carton and
discard all packaging. NOTE:
Save all parts bags.
Assemble Hose
1. Assemble hose to air outlet.
IMPORTANT: The hex fitting on
the air outlet MUST be held in
place with a wrench when
tightening hose onto air outlet.
D29495

ASSEMBLY

Assemble Accessories
Choose the accessory needed.
Assemble Female Tire Chuck
1. Assemble female tire chuck to
hose and tighten securely with
wrenches.
Inflating
Needle
Extension Tube
Assemble Other Accessories
1. Attach the hose adapter to hose.
2. Choose the needed accessory.
Attach the tapered nozzle,
extension tube, or blow gun
adapter to the hose adapter. The
inflating needle attaches to the
blow gun adapter. NOTE: The
tapered nozzle, extension tube,
and blow gun adapter can also
be attached to a blow gun (sold
separately, not shown).
10- ENG
Female Tire
Chuck
Tapered
Nozzle
Blow Gun
Adapter
Hose
Adapter
Hose
End