How To Start - Craftsman 919.722020 Mode D'emploi

Before Each Start-Up:
1. Place Off/Auto switch to "OFF"
and close air regulator.
2. Turn the regulator knob
counterclockwise until it stops.
3. Attach hose and accessories.
Risk of Bursting.
Too much air
pressure causes a hazardous risk
of bursting. Check the
manufacturer's maximum pressure
rating for air tools and accessories.
The regulator outlet pressure must
never exceed the maximum
pressure rating.

How to Start:

1. Turn the Off/Auto switch to
"AUTO" and allow tank pressure
to build. Motor will stop when
tank pressure reaches "cut-out"
pressure.
2. Turn the regulator knob
clockwise until desired pressure
is reached.
3. The compressor is ready for use.
15- ENG
D29495