Jenn-Air JMC2427IM Fiche Technique page 5

General Procedure: Error Codes
NOTE: All failures are stored in the failure history. To check if the error code
is still present, start a cooking function and wait 1 minute to check if the error
appears.
1. Enter Diagnostics Mode.
2.
Touch or scroll to "Error Diagnostics" in the Diagnostics menu, and then
touch "OK."
3. To clear error codes, touch "Clear History."
4.
If no failures are listed, the message "No Error" will appear on the screen.
General Procedure: Software Version
For Engineering Only.
General Procedure: Component Activation
1. Enter Diagnostics Mode.
2. Touch or scroll to "Component Activation" in the Diagnostics menu, and
then touch "OK."
NOTE: Touching "Back" will return the display to the main Diagnostics
Menu.
35 350 35
3.
Touching the following selections will activate/deactivate corresponding
relay.
Selection
MW Light
MW Turntable
MW Cooling Fan
MW Grill
MW Convection Element
MW Convection Fan
MW Magnetron/Cooling Fan
General Procedure: Sensors & Switches
NOTE: This procedure is to view the current status of oven switches and
sensor readings.
Display
MW Door Switch
MW Cavity Temp
5
Relay
MW Light Relay
MW Turntable Relay
MW Cooling Fan Relay
MW Broil Element Relay
MW Convection Element Relay
MW Convection fan Relay
MW Magnetron and MW Cooling
Fan Relay
Status
Open or Closed
Degrees in Celsius